Skip to main content
Run your first league
League owners, organizers and drivers7 min video + written steps

Step 5 of 9 · Run your first league

Prepare your season: points, car classes and the calendar

Save and assign points, create car classes, extend the race calendar, and verify driver choices, local race times and calendar downloads.

Before you start

  • Complete Create your league and welcome your first driver.
  • Have organizer access, a season, a first round and the intended points rules.
  • Use a separate approved season registration for the driver checks.

What you’ll be able to do

A season with checked scoring, usable car-class options and a race calendar verified from the driver view.

Watch: Prepare your season: points, car classes and the calendar

Captions are available in the player. The full transcript is below.

Jump to a chapter

  1. Read this step: Welcome back
  2. Read this step: Save and assign points
  3. Read this step: Create car classes
  4. Read this step: Extend the race calendar
  5. Read this step: Check the driver’s class
  6. Read this step: Set the personal timezone
  7. Read this step: Check the league calendar
  8. Read this step: Check and export your schedule
  9. Read this step: Season readiness recap

Watch on YouTubeThe player loads from YouTube when you press play. If it does not load, use this link or follow the written guide on this page.

Read the video transcript

00:00 — Welcome back Welcome back to Racey School! Your league and first season are set up. Now let's refine the points, car classes, and race calendar. Use the chapter timestamps or linked written guide to find each step. 00:14 — Save and assign points Let's turn your points rules into a saved scheme. Open Scoring. Choose GT3 Sprint, then Apply Preset. That fills the editor; it doesn't save your scheme. Check the points and bonuses against your league's rules. Here, a win pays twenty-five points, with one for pole and one for fastest lap. Choose Save as new, name the scheme Spring GT3, and select Create. Read the confirmation: seasons without scoring receive this scheme. Existing assignments stay unchanged. Now return to Seasons, open Edit season, and confirm the saved scheme is assigned. That's the important check: the right season, using the right rules. 01:14 — Create car classes Alright, let's give your drivers a class to choose. We covered the season's class label last time. This is where you create the actual options they'll see. Open Car classes, then Add Car Class. We'll use GT3 and BMW M4 GT3. Give those names a quick check... then select Add Class. Finally, reopen the dialog and make sure your new class is there. One small distinction: Roster's Class column is a driver category, such as Pro or Am. It doesn't select a driver's car. We'll check that choice in the driver's account. 02:00 — Extend the race calendar We added a first round in league setup. Here, Spa is March seventh at eight p.m., in the league's New York timezone. Let's extend the calendar. In Schedule, choose Add Round. Enter a clear round name, the track and its configuration. We'll add Monza on March twenty-first, again at eight p.m. Notice EDT beside the time. That's Eastern Daylight Time. Spa's earlier date uses EST, Eastern Standard Time. Both use the same New York timezone. The abbreviation changes with daylight saving. Both races still start at eight p.m. in New York. Leave Points scheme on Season default and use Single race for this example. Select Add Round, then reload and reopen it to check the saved start. Need a correction? Select Edit on the round. Update its name, then select Save Changes. Reload once more. Both races should now show the intended dates and times. 03:22 — Check the driver’s class Now let's see it as a driver. We're using a separate account that's already approved for this season. In My Leagues, find that registration. Beside Car Class, select Choose. Pick GT3, check the car name, then select Save Car Class. Reload the page. GT3 and the Change button confirm the choice was saved. Choosing a class doesn't complete race entry or check-in; those are separate steps. 04:00 — Set the personal timezone Before checking the race times, open Settings and find Timezone. This driver's in Los Angeles, so we'll choose Los Angeles, then Save Profile. Reopen Settings to check it stayed saved. Here's the useful distinction: My Schedule and the next-race card in Overview use this personal timezone. Public league, season and event pages use the league's timezone. So the same race can show different local times. Always read the timezone beside the start. 04:45 — Check the league calendar Back in My Leagues, select View League. Then choose Schedule. Open the season calendar. Check both rounds and the timezone printed above them. These are still eight p.m. New York starts. Download season calendar gives you the season's calendar file. Open a race as well, and check its full date, start time and timezone. Here, Spa still starts at eight p.m. in the league's timezone, even though this driver's profile is set to Los Angeles. 05:27 — Check and export your schedule Now open My Schedule. For our Los Angeles driver, both races show five p.m. The offset changes when the clocks change, but these are the same race starts we checked in New York. The rows also show car forty-two and GT3. Select Export schedule to download the driver's calendar. We checked both exported starts against the saved races. When you import the file, check your calendar's timezone too. Finally, open Overview and confirm its next race is Spa at five p.m. 06:16 — Season readiness recap Your points scheme is saved and assigned, the car class is available, and the race calendar has been checked from the driver's side. Nice, that's the foundation in place. Use the written checklist before sharing it with your drivers, and jump back through the chapters whenever you need a reminder. Next, we'll work on managing drivers and the roster. See you in Racey School!

AI narration by OpenAI Marin. Fictional demonstration accounts and data. Music and effects by Mixkit under the retained licenses.

On this page

Points, car classes and the race calendar — Racey School.

Use the video chapters or the matching written steps below to jump to the task you need.

Watch or jump to a chapter

The video takes 6 minutes 39 seconds. Use the chapters to find a step; each written section links to the matching video moment.

ChapterWatchWritten steps
Welcome back00:00Read this section
Save and assign points00:14Read this section
Create car classes01:14Read this section
Extend the race calendar02:00Read this section
Check the driver’s class03:22Read this section
Set the personal timezone04:00Read this section
Check the league calendar04:45Read this section
Check and export your schedule05:27Read this section
Season readiness recap06:16Read this section

Before you begin

Watch this step — 00:00

This lesson continues Create a league. Have your league and season ready, with organizer access and your intended points rules. The video uses the fictional Racey School Spring Cup and Spring Sprint 2027.

League creation, season dates, the first round, publishing, opening registration and driver approval are covered in the earlier lesson. Here we refine the saved scoring, create the actual car-class options, extend the calendar and verify the driver view.

For the driver check, open registration deliberately and use a separate approved driver account. Draft seasons remain hidden from people outside the league. Car-class setup and calendar creation do not publish the season or complete race entry.

Save and assign the points rules

Watch this step — 00:14

  1. Open Scoring in the league administration area.
  2. Choose GT3 Sprint, then Apply Preset. Applying a preset fills the editor; it does not save a new scheme.
  3. Check the points and bonuses against your league rules. This example awards 25, 20, 16, 13, 11, 10, 9, 8, 7 and 6 points for places one through ten, with one point each for pole and fastest lap.
  4. Select Save as new, name the scheme Spring GT3, then select Create.
  5. Read the confirmation. The new scheme is assigned to seasons in this league that have no scoring; existing assignments remain unchanged.
  6. Return to Seasons → Edit season. Confirm that Scoring shows the intended saved scheme.

Success check: reload and reopen the season. The intended scheme remains selected. A filled editor or an applied preset alone is not that confirmation.

When revising rules later: a saved scheme can be shared by several seasons. Save Config updates the loaded scheme. Use Save as new when you need a separate scheme, then deliberately check the season assignment.

Create the actual car classes

Watch this step — 01:14

On the season card, open Car classes → Add Car Class. Enter Class Name and Car Name. The example uses GT3 and BMW M4 GT3. Check the names, select Add Class, then reload and reopen Car classes.

Success check: the new class and car are listed after reloading.

Keep these settings distinct:

SettingPurpose
Car Class in Edit seasonThe season's class label
Car classes on the season cardThe actual class options configured for that season
Class in RosterA driver category, such as Pro or Am

A season label or driver category does not select a driver's car. Creating classes alone does not establish separate class scoring or standings; advanced scoring is a separate lesson.

Extend and check the race calendar

Watch this step — 02:00

Continue from the first round created in the league-setup lesson. Open Schedule and confirm the intended season.

  1. Select Add Round.
  2. Enter a clear Round Name, Track and Track Configuration. These are text fields.
  3. Set Date and Time, using the league timezone shown beside the Time field.
  4. Leave Points scheme on Season default to use the season's assigned scoring. Use Single race for this example.
  5. Select Add Round. Reload, reopen the round and check the saved details.
  6. To correct a round, select Edit, change the intended field and save. Reload and check again. The video clarifies the second round's name to Round 2 - Monza GP.

The timezone has not changed. Both rounds use New York (Eastern Time), saved as America/New_York. EST means Eastern Standard Time; EDT means Eastern Daylight Time. New York changes to daylight-saving time on March 14, 2027, between these race dates. Both races remain at 20:00 New York time. The track names Spa and Monza do not choose the timezone.

The league timezone is under League Settings → General → Timezone. Seasons do not have a separate timezone control. Do not change that setting just to make the EST/EDT abbreviations match.

The date-dependent change follows the current daylight-saving rules. For this example:

RoundLeague startSame instant in UTC
Round 1 - SpaMarch 7, 2027, 20:00 New York (EST)March 8, 01:00 UTC
Round 2 - Monza GPMarch 21, 2027, 20:00 New York (EDT)March 22, 00:00 UTC

Success check: both saved rounds show the intended dates, starts, tracks and points scheme. Check the named league timezone and the saved local start on each date. A daylight-saving abbreviation change alone does not mean a different timezone was selected.

The form may warn about dates outside the season window and still permit saving them, for example for a preseason event. Review such choices deliberately.

Check a driver's car-class choice

Watch this step — 03:22

Use a separate driver who is approved for the intended season. The example uses Alex Morgan, car number 42, while the season is in Registration.

Open My Leagues and find the correct season registration. Beside Car Class, select Choose, select GT3 — BMW M4 GT3, then Save Car Class. Reload the page.

Success check: the row shows GT3 and a Change control. The class remains selected after a reload. New applicants can also choose an available class in the registration form; this video demonstrates an existing approved driver's choice.

Selecting a class does not complete race entry or check-in. This lesson does not cover editing closed registrations or seasons.

Set and verify the personal timezone

Watch this step — 04:00

Open Settings → Profile and find Timezone. Select the driver's timezone, scroll to Save Profile, and save. Reopen Settings to verify it persists. The example selects America/Los_Angeles.

PageTimezone used
My ScheduleDriver's saved profile timezone
Overview, next-race cardDriver's saved profile timezone
Public league, season and event pagesLeague timezone

Success check: Settings retains the chosen timezone after reloading. Read the timezone beside race times; different local displays can represent the same instant.

Check the public league calendar

Watch this step — 04:45

From My Leagues, select View League → Schedule, then View Spring Sprint 2027 for this example.

Check both rounds and the Times in America/New_York label. The season table shows 20:00 for both races. Use the .ics download control, labelled Download season calendar (.ics), to download the season calendar.

Open Round 1 - Spa and check the full event date and time: March 7, 2027, 20:00 GMT-5. The event page uses the league timezone even when the driver's profile is Los Angeles.

Success check: the league calendar and event agree with the intended saved race start.

Check and export the personal schedule

Watch this step — 05:27

Return to Dashboard, then open My Schedule. Check the stated personal timezone, both races, and the registration details.

In this example, the Los Angeles driver sees:

Race datePersonal displayLeague display
March 7, 202717:00 GMT-820:00 EST
March 21, 202717:00 GMT-720:00 EDT

The rows also show #42 / GT3. Select Export schedule to download the driver's calendar. The season and personal files in this walkthrough were checked against the saved race starts: March 8 at 01:00 UTC and March 22 at 00:00 UTC.

When importing into your own calendar, check that calendar's timezone and the resulting event times. The walkthrough verifies downloaded files; it does not demonstrate an external calendar import. Re-export and recheck after schedule changes; do not assume a previously imported file updates itself.

Finally, open Overview. The next race should be Spa at 17:00 GMT-8 for this Los Angeles profile.

Season readiness checklist

Watch this step — 06:16

  • The intended points scheme is saved and assigned to the correct season.
  • Actual car classes are configured and distinct from the season label and driver categories.
  • An approved driver's class choice survives a reload.
  • Every round has the intended track, date, time and points scheme.
  • League and personal views represent the same race starts in their respective timezones.
  • Exported calendar starts agree with the saved races.
  • Registration and visibility are deliberate; use the league-setup lesson if those steps are still pending.

Return to the chapters whenever you need a reminder. The next planned lesson covers managing drivers and the roster. Race entry, check-in, advanced class scoring and results are separate workflows.

Before you move on

  • The saved points scheme remains assigned after reloading.
  • Actual car classes are available and an approved driver can save a choice.
  • League and personal times represent the same race starts.
  • Season and personal calendar downloads match the saved races.